FRP

รายละเอียด

The Binks Century FRP Equipment Platform

The addition of the new Century Pump to the Binks LEL, or “Low Emission Laminator” technology provides a complete selection of FRP spray guns, spray tips, air nozzles and mixing valves for the non-atomizing application of resins and gel coats used in open molding processes.
*Low Emission Laminator の略

MACT Compliance (Maximum Achievable Control Technology)

Of critical importance to composites manufacturers is the use of EPA Compliant “Maximum Achievable Control Technologies” in their operations. One such technology used in Binks Century LEL Spray Guns is non-atomizing resin application, or “NARA”(Non-atomizing Resin Application).

Through extensive testing using guidelines from the ACMA’s Styrene Emissions Test Protocol, Binks Century LEL guns have been tested and all been proven to emit monomer at or below the levels predicted equations per EPA guidelines.

Binks Century LEL Spray Gun product line meets or exceeds the EPA’s definition of Non-Atomizing Mechanical Application per the Composites NESHAP.
The complete emissions test report is available from Finishing Equipment Americas upon request.

FRP
Binks Offers the Very Best Production Systems
FRP

Of critical importance to composites manufacturers is the use of EPA Compliant “Maximum Achievable Control Technologies” in their operations. One such technology used in Binks Century LEL Spray Guns is non-atomizing resin application, or “NARA”(Non-atomizing Resin Application).

Through extensive testing using guidelines from the ACMA’s Styrene Emissions Test Protocol, Binks Century LEL guns have been tested and all been proven to emit monomer at or below the levels predicted equations per EPA guidelines.

Binks Century LEL Spray Gun product line meets or exceeds the EPA’s definition of Non-Atomizing Mechanical Application per the Composites NESHAP.
The complete emissions test report is available from Finishing Equipment Americas upon request.

Users can expect:

  • Benefits from lower overspray
  • Increased transfer efficiency results in material savings
  • A cleaner workspace and lower worker exposure to fumes and mist
  • Less frequent booth filter changes
  • Benefits from lower fluid pressure
  • Less pump wear – seals, other sliding parts
  • Lower air motor pressure results in lower compressed air consumption
New Design Optimized for your Application

The Binks Century resin and catalyst pump features several new innovations, designed to provide dependable, long lasting performance under the most demanding production environments, including:

FRP
FRP
FRP
FRP Spray Gun Selection Guide

MACT-compliant low emission laminators

  • Uniform, consistent, reliable mix
  • Internal or External mix of catalyst and resin available
  • One-touch flush for easy cleaning
  • Cartridge resin needle and seat assembly
  • Resin cartridge needle assembly changes out in less than five minutes

This chart will help you quickly assess which Binks spray gun is suitable for your specific application. First, decide what type of spray gun you need. Then, under the heading that meets these criteria, find the usage description that best matches your application.

Part No.102-3610
FRP

Binks Century LEL External Mix Gel Coat Gun is renowned for its easy operation and low maintenance.

Part No.102-3655
FRP

Binks Century LEL External Mix Chopper gun

Part No.102-3610
FRP

Binks Internal Mix Century LEL Wet Out Gun

FRP Specifications
 CX2006HCCX2017HC
Pressure Ratio6.5:117:1
Flow Rate at 60 cycles per minute2.0 GPM (7.6 L/min)
Supports1 Century Spray Gun–“62” LEL tip or .036″ AA tip
Displacement per cycle4.26 oz (126 cm³)
Inlet Fluid Connection1″ NPT (f) or 1¼” NPT (m)
Outlet Fluid Connection1/2″ NPT (f)
Air Connection3/8″ NPT (f)
Wetted Materials Resin PumpAnodized Aluminum, Plated Carbon Steel, Stainless Steel, Hard Chrome, Nylon, PTFE, UHMWPE, Tungsten Carbide
Wetted Materials Catalyst PumpStainless Steel, Silicone Rubber, PTFE, UHMWPE
Max Fluid Pressure with included air motor750 psi (52 bar)1970 psi (136 bar)
Max Air Inlet Pressure116 psi (8 bar)
Max Recommended Cycle RateUp to 40 Cycles/minute—not continuous
Noise Level96 dB(A)97 dB(A)
FRP Spray Gun Selection Guide
 

Gel Coat

Wet-Out

Chop

Grani-Coat

Filled Resin

2K Adhesives

External Mix

Internal Mix

Touch-Up

Conventional Spray

HVLP HVLP Spray

A-AA AIR ASSISTED AIRLESS HVLP
102-2400        
102-2500        
102-2545       
102-2455        
LEL LOW EMISSIONS LAMINATOR
102-3600         
102-3610         
102-3655         
102-3650        
102-3665        
102-3800-1         
102-3800-2         
102-3825-1         
102-3825-2         
102-3835-1        
102-3835-2        
EXT MIX RES
EXT MIX GEL
INT MIX RES
FRP
Related Product

FRP

FRP

Categories , Tags ,

รายละเอียด

The Binks Century FRP Equipment Platform

The addition of the new Century Pump to the Binks LEL, or “Low Emission Laminator” technology provides a complete selection of FRP spray guns, spray tips, air nozzles and mixing valves for the non-atomizing application of resins and gel coats used in open molding processes.
*Low Emission Laminator の略

MACT Compliance (Maximum Achievable Control Technology)

Of critical importance to composites manufacturers is the use of EPA Compliant “Maximum Achievable Control Technologies” in their operations. One such technology used in Binks Century LEL Spray Guns is non-atomizing resin application, or “NARA”(Non-atomizing Resin Application).

Through extensive testing using guidelines from the ACMA’s Styrene Emissions Test Protocol, Binks Century LEL guns have been tested and all been proven to emit monomer at or below the levels predicted equations per EPA guidelines.

Binks Century LEL Spray Gun product line meets or exceeds the EPA’s definition of Non-Atomizing Mechanical Application per the Composites NESHAP.
The complete emissions test report is available from Finishing Equipment Americas upon request.

FRP
Binks Offers the Very Best Production Systems
FRP

Of critical importance to composites manufacturers is the use of EPA Compliant “Maximum Achievable Control Technologies” in their operations. One such technology used in Binks Century LEL Spray Guns is non-atomizing resin application, or “NARA”(Non-atomizing Resin Application).

Through extensive testing using guidelines from the ACMA’s Styrene Emissions Test Protocol, Binks Century LEL guns have been tested and all been proven to emit monomer at or below the levels predicted equations per EPA guidelines.

Binks Century LEL Spray Gun product line meets or exceeds the EPA’s definition of Non-Atomizing Mechanical Application per the Composites NESHAP.
The complete emissions test report is available from Finishing Equipment Americas upon request.

Users can expect:

  • Benefits from lower overspray
  • Increased transfer efficiency results in material savings
  • A cleaner workspace and lower worker exposure to fumes and mist
  • Less frequent booth filter changes
  • Benefits from lower fluid pressure
  • Less pump wear – seals, other sliding parts
  • Lower air motor pressure results in lower compressed air consumption
New Design Optimized for your Application

The Binks Century resin and catalyst pump features several new innovations, designed to provide dependable, long lasting performance under the most demanding production environments, including:

FRP
FRP
FRP
FRP Spray Gun Selection Guide

MACT-compliant low emission laminators

  • Uniform, consistent, reliable mix
  • Internal or External mix of catalyst and resin available
  • One-touch flush for easy cleaning
  • Cartridge resin needle and seat assembly
  • Resin cartridge needle assembly changes out in less than five minutes

This chart will help you quickly assess which Binks spray gun is suitable for your specific application. First, decide what type of spray gun you need. Then, under the heading that meets these criteria, find the usage description that best matches your application.

Part No.102-3610
FRP

Binks Century LEL External Mix Gel Coat Gun is renowned for its easy operation and low maintenance.

Part No.102-3655
FRP

Binks Century LEL External Mix Chopper gun

Part No.102-3610
FRP

Binks Internal Mix Century LEL Wet Out Gun

FRP Specifications
 CX2006HCCX2017HC
Pressure Ratio6.5:117:1
Flow Rate at 60 cycles per minute2.0 GPM (7.6 L/min)
Supports1 Century Spray Gun–“62” LEL tip or .036″ AA tip
Displacement per cycle4.26 oz (126 cm³)
Inlet Fluid Connection1″ NPT (f) or 1¼” NPT (m)
Outlet Fluid Connection1/2″ NPT (f)
Air Connection3/8″ NPT (f)
Wetted Materials Resin PumpAnodized Aluminum, Plated Carbon Steel, Stainless Steel, Hard Chrome, Nylon, PTFE, UHMWPE, Tungsten Carbide
Wetted Materials Catalyst PumpStainless Steel, Silicone Rubber, PTFE, UHMWPE
Max Fluid Pressure with included air motor750 psi (52 bar)1970 psi (136 bar)
Max Air Inlet Pressure116 psi (8 bar)
Max Recommended Cycle RateUp to 40 Cycles/minute—not continuous
Noise Level96 dB(A)97 dB(A)
FRP Spray Gun Selection Guide
 

Gel Coat

Wet-Out

Chop

Grani-Coat

Filled Resin

2K Adhesives

External Mix

Internal Mix

Touch-Up

Conventional Spray

HVLP HVLP Spray

A-AA AIR ASSISTED AIRLESS HVLP
102-2400        
102-2500        
102-2545       
102-2455        
LEL LOW EMISSIONS LAMINATOR
102-3600         
102-3610         
102-3655         
102-3650        
102-3665        
102-3800-1         
102-3800-2         
102-3825-1         
102-3825-2         
102-3835-1        
102-3835-2        
EXT MIX RES
EXT MIX GEL
INT MIX RES
FRP
Product Enquiry Request