SMART Pumps

Think Smart, as for your performance as for the environment

รายละเอียด

Think Smart, as for your performance as for the environment

The unit combines conventional electrical hardware to achieve optimum operating performance at a lower cost. Running costs are much lower than compressed air driven model.

Used with an optional smart card, high savings in running cost can be realized, by delivering the paint to the user point at the correct pressure and volume only when needed.

The SMART pump range uses a standard electric motor to drive the fluid section for pumping paints, solvent and other suitable materials, reducing paint shear due to the positive dissplacement piston design and thanks to a cam and cam followers combined with a sliding carriage unit without required surge chamber.

SMART Pumps
SMART Pumps

Very recoverable against bending stress

SMART Pumps
Features
  • Fluid Seal:
    Piston seal lubricated by paint on both sides, increasing seal life / No external paint leaks when seal requires replacement
  • Sanitary inlet and outlet connections guarantee a smooth internal pipe connection without paint entrapment pockets
  • Bellows Seal:
    no exposed shaft seal reducing the need for maintenance and lubrication of shaft packing (perfect for light & moisture sensitive materials)
  • Flow Rate Control:
    adjusted operation speed by standard AC frequency inverter to achieve a speed range from 10 to 40 cycle / min – infinite manual or automatic control
  • Reciprocating drive:
    achieved by a sliding carriage mechanism & rotating constant velocity cam with special profile reducing fluid pressure fluctuations to a minimum (no surge chamber required)
SMART Pumps
  • Operation mode:
    Simple flow mode like a conventional air motor driven pump or by pressure control to achieve maximum «Smart» energy savings
  • Horizontal Short Stroke Design:
    Equal thrust on both pistons / equal flow and pressure for both strokes / higher cycle rate than conventional vertical Pumps and thus more flexibility for paint flow range
  • Fluid sections:
    Tungsten carbide ball seats & ceramic coated pistons to maximize operating life between servicing / capability for pumping abrasive & aggressive materials
Proven Technology
SMART Pumps
  1. Low power consumption electric motor, combined with Binks Smart System, delivers significant energy savings over conventional pneumatic pumps.
  2. AC frequency inverter removes further energy loss caused by conversion to DC.
  3. New manifold elbow connections for easier configuration and installation.
  4. Universally available sanitary fittings guarantee a smooth interior connection with no paint trap pockets.
  5. New Auto-Lubrication System provides correct automatic lubrication for up to a year. Meets new ATEX requirements.
  6. Horizontal Short Stroke Design gives equal thrust from both pistons, allowing a wider cycle rate (10-40 cycles/min) and greater flexibility of flow rate.
  7. Patented reciprocating drive incorporating sliding carriage mechanism with asymmetric constant velocity cam, gives a smooth transition and virtually eliminates material pressure fluctuations.
  8. Horizontal fluid sections compatible with shear sensitive solvent and water based materials.
  9. Internal ‘Fail-safe’ bellows seal with ‘tell-tale’ leak indicator.
Specifications
 E2-15E2-30E2-40E2-60
Nominal stoke50mm / 1.97″60mm / 2.36″
Max fluid pressure1.8 MPa1.8 MPa1.6 MPa1.8 MPa
Fluid output from 20Hz to 80 Hz3.75 L~ 15 L7.5 L~ 30 L10 L~ 40 L15 L~ 60 L
Flow Volume / Cycle0.375 L0.75 L1 L1.5 L
Fluid connectionsInlet and outlet 1″ SanitaryInlet and outlet 1 ½” SanitaryInlet and outlet 1 ½” SanitaryInlet and outlet 1 ½” Sanitary
Pump weight78 kg250 kg250 kg295 kg
Electric motorEU/USA: 400V, 3PH, 1kW
JPN: 400V, 4PH, 0.75kW
EU/USA: 400V, 3PH, 2kW
JPN: 400V, 4PH, 1.5kW
EU/USA: 400V, 3PH, 2kW
JPN: 400V, 4PH, 1.5kW
EU/USA: 400V, 3PH, 3kW
JPN: 400V, 4PH, 2.2kW
Accessories
E2-15E2-30E2-40E2-60
PRV22-U-10 – Pressure relief valve- 1″ SanitaryPRV22-U-15 – 1 1/2″ Sanitary Pressure Relief Valve5PRV22-U-15 – 1 1/2″ Sanitary Pressure Relief Valve
192547 Pressure Transducer (0 ~ 4.0 MPa)
502144 Pressure switch range (2 ~ 4.0 MPa)
192720 Sensor Manifold
502501 BPR Control Box
192206 1″ Sanitary Gasket192208 1-1/2Sanitary Gasket
192209 1″ Sanitary Clamp192209 1-1/2″ Sanitary Clamp
EV2-30

Small footprint vertical pump

 EV2-30
Nominal stoke50mm / 1.97″
Maximum fluid pressure2.0 MPa
Fluid output from 20Hz to 80 Hz7.5L~ 30L
Flow Volume / Cycle0.75L
Fluid connectionsInlet and outlet 1 ½” Sanitary
Pump weight256 kg
Electric motorEU: 400V, 3PH, 1.5kW
SMART Pumps
Download
Related Product

SMART Pumps

Think Smart, as for your performance as for the environment

รายละเอียด

Think Smart, as for your performance as for the environment

The unit combines conventional electrical hardware to achieve optimum operating performance at a lower cost. Running costs are much lower than compressed air driven model.

Used with an optional smart card, high savings in running cost can be realized, by delivering the paint to the user point at the correct pressure and volume only when needed.

The SMART pump range uses a standard electric motor to drive the fluid section for pumping paints, solvent and other suitable materials, reducing paint shear due to the positive dissplacement piston design and thanks to a cam and cam followers combined with a sliding carriage unit without required surge chamber.

SMART Pumps
SMART Pumps

Very recoverable against bending stress

SMART Pumps
Features
  • Fluid Seal:
    Piston seal lubricated by paint on both sides, increasing seal life / No external paint leaks when seal requires replacement
  • Sanitary inlet and outlet connections guarantee a smooth internal pipe connection without paint entrapment pockets
  • Bellows Seal:
    no exposed shaft seal reducing the need for maintenance and lubrication of shaft packing (perfect for light & moisture sensitive materials)
  • Flow Rate Control:
    adjusted operation speed by standard AC frequency inverter to achieve a speed range from 10 to 40 cycle / min – infinite manual or automatic control
  • Reciprocating drive:
    achieved by a sliding carriage mechanism & rotating constant velocity cam with special profile reducing fluid pressure fluctuations to a minimum (no surge chamber required)
SMART Pumps
  • Operation mode:
    Simple flow mode like a conventional air motor driven pump or by pressure control to achieve maximum «Smart» energy savings
  • Horizontal Short Stroke Design:
    Equal thrust on both pistons / equal flow and pressure for both strokes / higher cycle rate than conventional vertical Pumps and thus more flexibility for paint flow range
  • Fluid sections:
    Tungsten carbide ball seats & ceramic coated pistons to maximize operating life between servicing / capability for pumping abrasive & aggressive materials
Proven Technology
SMART Pumps
  1. Low power consumption electric motor, combined with Binks Smart System, delivers significant energy savings over conventional pneumatic pumps.
  2. AC frequency inverter removes further energy loss caused by conversion to DC.
  3. New manifold elbow connections for easier configuration and installation.
  4. Universally available sanitary fittings guarantee a smooth interior connection with no paint trap pockets.
  5. New Auto-Lubrication System provides correct automatic lubrication for up to a year. Meets new ATEX requirements.
  6. Horizontal Short Stroke Design gives equal thrust from both pistons, allowing a wider cycle rate (10-40 cycles/min) and greater flexibility of flow rate.
  7. Patented reciprocating drive incorporating sliding carriage mechanism with asymmetric constant velocity cam, gives a smooth transition and virtually eliminates material pressure fluctuations.
  8. Horizontal fluid sections compatible with shear sensitive solvent and water based materials.
  9. Internal ‘Fail-safe’ bellows seal with ‘tell-tale’ leak indicator.
Specifications
 E2-15E2-30E2-40E2-60
Nominal stoke50mm / 1.97″60mm / 2.36″
Max fluid pressure1.8 MPa1.8 MPa1.6 MPa1.8 MPa
Fluid output from 20Hz to 80 Hz3.75 L~ 15 L7.5 L~ 30 L10 L~ 40 L15 L~ 60 L
Flow Volume / Cycle0.375 L0.75 L1 L1.5 L
Fluid connectionsInlet and outlet 1″ SanitaryInlet and outlet 1 ½” SanitaryInlet and outlet 1 ½” SanitaryInlet and outlet 1 ½” Sanitary
Pump weight78 kg250 kg250 kg295 kg
Electric motorEU/USA: 400V, 3PH, 1kW
JPN: 400V, 4PH, 0.75kW
EU/USA: 400V, 3PH, 2kW
JPN: 400V, 4PH, 1.5kW
EU/USA: 400V, 3PH, 2kW
JPN: 400V, 4PH, 1.5kW
EU/USA: 400V, 3PH, 3kW
JPN: 400V, 4PH, 2.2kW
Accessories
E2-15E2-30E2-40E2-60
PRV22-U-10 – Pressure relief valve- 1″ SanitaryPRV22-U-15 – 1 1/2″ Sanitary Pressure Relief Valve5PRV22-U-15 – 1 1/2″ Sanitary Pressure Relief Valve
192547 Pressure Transducer (0 ~ 4.0 MPa)
502144 Pressure switch range (2 ~ 4.0 MPa)
192720 Sensor Manifold
502501 BPR Control Box
192206 1″ Sanitary Gasket192208 1-1/2Sanitary Gasket
192209 1″ Sanitary Clamp192209 1-1/2″ Sanitary Clamp
EV2-30

Small footprint vertical pump

 EV2-30
Nominal stoke50mm / 1.97″
Maximum fluid pressure2.0 MPa
Fluid output from 20Hz to 80 Hz7.5L~ 30L
Flow Volume / Cycle0.75L
Fluid connectionsInlet and outlet 1 ½” Sanitary
Pump weight256 kg
Electric motorEU: 400V, 3PH, 1.5kW
SMART Pumps
Download
Product Enquiry Request