AGXV HVLP

Simply designed with high endurance and HVLP technology
The AGXV high volume, low-pressure spray gun (spray pistol) is used on automatic and semi-automatic machines where mass production spraying is necessary, or hand spraying is not accurate enough. Models and application information follows.

รายละเอียด

Simply designed with high endurance and HVLP technology

The AGXV high volume, low pressure spray gun (spray pistol) is used on automatic and semi-automatic machines where mass production spraying is necessary, or hand spraying is not accurate enough. Models and application information follows.
All models are designed to provide maximum transfer efficiency by limiting air cap pressure to 10 psi (0.7 bar). Air cap pressure can be measured with an optional air cap test kit.

  • Straight-forward design with trusted durability
  • HVLP technology ensures paint saving work
HVLP

A high volume, low pressure gun (low pressure, large capacity atomizing) to meet the needs of the current generation.

HVLP spray guns currently gaining attention as low pollution-type painting devices have achieved coating efficiencies equal to or exceeding 65%, making it possible to reduce the amount of paint used by a significant margin when compared to normal air spray guns. As a result, it has become easier to clean and remove paint from workplaces thanks to reduced overspray.

Specifications
Maximum Inlet Pressure0.69MPa (7.0kgf/cm²)
Maximum Fluid Pressure0.69MPa (7.0kgf/cm²)
Cylinder Air PressureMin 0.34MPa (3.5kgf/cm²)
Max 0.69MPa (7.0kgf/cm²)
Weight738g (without mounting stud)
865g (with mounting stud)
Mounting stud diameter19mm
Fluid InletG3/8(M)
Cylinder AirG1/4(M)
Atomization AirG1/4(M)
Air Caps – Patterns – Application
Air CapFluid Tip Size(mm)Pattern Size and Shape
Air Cap No.Complete Air Cap No.
33AAGHV-101-33AE(1.8), FF(1.4)
FX(1.1)、G(0.7)
230mm, tapered
46MPAGHV-101-46MPFF(1.4), FX(1.1)280mm, straight
83MPAGHV-101-83MPD(2.2), E(1.8)330mm, straight
Typical Application

33A : For general paints and low discharge rates (up to 300mL/min)
46MP : For general paints, medium viscosities, and medium discharge rates (up to 300 to 500mL/min)
83MP : For general paints, medium viscosities, and large discharge rates (up to 500mL/min)

This gun may be used with chlorinated solvents. Aluminum is not used in fluid passages.
If using chlorinated solvents, make sure all other fluid handling components are also compatible.

Download
Related Product

AGXV HVLP

Simply designed with high endurance and HVLP technology
The AGXV high volume, low-pressure spray gun (spray pistol) is used on automatic and semi-automatic machines where mass production spraying is necessary, or hand spraying is not accurate enough. Models and application information follows.

รายละเอียด

Simply designed with high endurance and HVLP technology

The AGXV high volume, low pressure spray gun (spray pistol) is used on automatic and semi-automatic machines where mass production spraying is necessary, or hand spraying is not accurate enough. Models and application information follows.
All models are designed to provide maximum transfer efficiency by limiting air cap pressure to 10 psi (0.7 bar). Air cap pressure can be measured with an optional air cap test kit.

  • Straight-forward design with trusted durability
  • HVLP technology ensures paint saving work
HVLP

A high volume, low pressure gun (low pressure, large capacity atomizing) to meet the needs of the current generation.

HVLP spray guns currently gaining attention as low pollution-type painting devices have achieved coating efficiencies equal to or exceeding 65%, making it possible to reduce the amount of paint used by a significant margin when compared to normal air spray guns. As a result, it has become easier to clean and remove paint from workplaces thanks to reduced overspray.

Specifications
Maximum Inlet Pressure0.69MPa (7.0kgf/cm²)
Maximum Fluid Pressure0.69MPa (7.0kgf/cm²)
Cylinder Air PressureMin 0.34MPa (3.5kgf/cm²)
Max 0.69MPa (7.0kgf/cm²)
Weight738g (without mounting stud)
865g (with mounting stud)
Mounting stud diameter19mm
Fluid InletG3/8(M)
Cylinder AirG1/4(M)
Atomization AirG1/4(M)
Air Caps – Patterns – Application
Air CapFluid Tip Size(mm)Pattern Size and Shape
Air Cap No.Complete Air Cap No.
33AAGHV-101-33AE(1.8), FF(1.4)
FX(1.1)、G(0.7)
230mm, tapered
46MPAGHV-101-46MPFF(1.4), FX(1.1)280mm, straight
83MPAGHV-101-83MPD(2.2), E(1.8)330mm, straight
Typical Application

33A : For general paints and low discharge rates (up to 300mL/min)
46MP : For general paints, medium viscosities, and medium discharge rates (up to 300 to 500mL/min)
83MP : For general paints, medium viscosities, and large discharge rates (up to 500mL/min)

This gun may be used with chlorinated solvents. Aluminum is not used in fluid passages.
If using chlorinated solvents, make sure all other fluid handling components are also compatible.

Download
Product Enquiry Request